Satin aluminum achieved by rotary sanding or chemically cleaning and etching.

Pole shafts are dry sanded without lubricant and shot blasted before the coating process. Brackets, castings and other components are cleaned in a mild basic solution, rinsed in clear water, etched in a mild acid solution, rinsed in clear water and allowed to dry thoroughly.

Weather-resistant polyester or urethane thermoset powder is electrostatically applied, oven cured and bonded at approximately 400 degrees F to a minimum dry film thickness of 1.5 mils.

Our standard thermoset powder coating is a minimum 1.5 mils of urethane or polyester thermoset powders. The National Association of Architectural Metal Manufacturers, Metal Finishes Manual, rates the outdoor life of these powders at 15 plus years.