36k - S6 Series Suspension Insulators from MacLean Power Systems

View other Suspension, Glass Insulators

Inquire

from
MacLean Power Systems for
36k - S6 Series Suspension Insulators

Description

  • CR E-Glass Core – MPS uses “Boron Free” Corrosion Resistant E-Glass on all its insulators for its High Electrical Integrity & High Resistance to acid corrosion. The boron free formulation of the fiberglass core makes it resistant to nitric acid attacks. There has never been a brittle facture failure of a CR Eglass insulator in over 30 years of use.
  • Silicone Rubber – MPS uses a Silicone formulation that has been unchanged since the early 80’s. The Si-O molecular bonds (inorganic backbone of Silicone) are very stable and have bond strengths higher than sunlight, making the silicone resistant to UV degradation. In addition to providing protection against ultraviolet radiation, electrical aging, and corona effect, silicone exhibits hydrophobic properties; which provide excellent recovery characteristics to control leakage currents in highly polluted or coastal environments. The MPS silicone rubber formulation has consistently outperformed other silicone formulations in its hydrophobicity, its hydrophobicity recovery rate, and enhanced electrical properties in contaminated environments.
  • P-S-T End Fitting Seal – The P S-T sealing system is a triple seal design with built-in redundancies. Primary seal – rubber sheath compressed into chamfer of end fitting. Secondary seal – RTV silicone applied to core / sheath / end fitting interface. Tertiary seal – final external RTV seal applied to sheath / end fitting interface. The P-S-T system has clearly shown its superiority to withstand moisture penetration.
  • Detailed Specifications
  • Item36k - S6 Series Suspension Insulators
  • CompanyMacLean Power Systems
  • PriceInquire
  • CatalogNumberS648040VX08
  • Quantity0
  • Leakage Distance (In.)10.1
  • Flashover, Dry (Kv)284
  • Flashover, Wet (Kv)256
  • Manufacturer’s CommentElectrical Data is without Corona Rings. For Insulators 230kV & Higher, MPS recommends use of Corona Rings.

More Information
Inquire

from
MacLean Power Systems for
36k - S6 Series Suspension Insulators

MacLean Power Systems
11411 Addison St
Franklin Park, IL 60131
United States
Phone:
Vendor Profile
Web Site: