Single,Hydraulic,Oil Intake 15kV

Compare and Learn about Single,Hydraulic,Oil Intake 15kV

Sort By

Select up to 5 products from below to compare or request more information.

nominal voltage: 2.4kV - 14.4 kV
Maximum Continuous Current: 100 A
Maximum Interrupting Current (symmetrical): 2000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?):
Remote lockout indicator: As accesssories - Lockout-indicating switch provides remote indication of recloser lockout.
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories
:
- Lockout Indication
- Bushings - 17-in.-creepage bushing
weight
:
- Weight-dry : 76 lbs.
- Weight-with oil : 114 lbs.
Finish/color: Heads are aluminum castings. Heavy-gage steel tanks are finished with an inhibiting epoxy prime coat and finish-coated with thermosetting acrylic paint. Finish color is light gray.
manufacturer's comment: Reclosers operate best when protected with surge arresters. On line applications, arrester protection is recommended on both sides of the recloser. If protection is to be provided on one side only, install the arrester on the source side. In substations, arresters are located on the load side. Cooper Power Systems distribution-class arresters provide excellent protection.

Inquire

Compare for selected.

nominal voltage: 2.4kV - 14.4 kV
Maximum Continuous Current: 280 A
Maximum Interrupting Current (symmetrical): 4000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?):
Remote lockout indicator: As accesssories - Lockout-indicating switch provides remote indication of recloser lockout.
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories
:
- Lockout Indication
- Bushings: 17-in.-creepage bushings
- Hardware : Two-bolt flat pad connectors
weight
:
- Weight-dry : 106 lbs.
- Weight-with oil : 159 lbs.
Finish/color: Heads are aluminum castings. Heavy-gage steel tanks are finished with an inhibiting epoxy prime coat and finish-coated with thermosetting acrylic paint. Finish color is light gray.
manufacturer's comment: Reclosers operate best when protected with surge arresters. On line applications, arrester protection is recommended on both sides of the recloser. If protection is to be provided on one side only, install the arrester on the source side. In substations, arresters are located on the load side. Cooper Power Systems distribution-class arresters provide excellent protection.

Inquire

Compare for selected.

nominal voltage: 2.4kV - 14.4 kV
Maximum Continuous Current: 560 A
Maximum Interrupting Current (symmetrical): 10000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?):
Remote lockout indicator:
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories:
weight: Weight-with oil : 430 lbs.
Finish/color: Heads are aluminum castings and the tanks are constructed of heavy-gage steel. The tanks are treated with a corrosioninhibiting epoxy primer, followed by a finish coat of thermosetting acrylic paint.
manufacturer's comment: Best operating results are achieved if reclosers are protected with surge arresters. On line applications, arrester protection is recommended on both sides of the recloser. (If protection is on one side only, it should be on the source side.) In substations, arresters should be on the load side. Arresters provide excellent protection and are available with mounting brackets to fit Kyle reclosers