3 Phase,Electro,Vacuum Intake 15kV

Compare and Learn about 3 Phase,Electro,Vacuum Intake 15kV

Sort By

Select All

Select up to 5 products from below to compare or request more information.

Get Quote Compare

OVR-3 Three-Phase Recloser

ABB Inc

nominal voltage: 2.4-14.4 kV
Maximum Continuous Current: 630/800/1000/1200 A
Maximum Interrupting Current (symmetrical): 8000/10000/12500/16000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Hydrophobic Cycloaliphatic Epoxy (HCEP)
Remote lockout indicator: Available
Standard bushing leakage distance to ground: 38.00 In. (960 mm)
Alternative bushing leakage distance to ground: 9.50 In. (240 mm)
Available factory installed accessories: Supported communications technologies include: Wi-Fi, Cellular, Radio, Ethernet, SCADA, 900 MHz Spread and Spectrum
weight: 333 lbs. (150 kg)
Finish/color: Amber
manufacturer's comment
: Benefits are:
- Compact, lightweight design is easy to install, maneuver, and transport
- Cast aluminum or 304 stainless steel protects high and low voltage cabinets from the elements
- Variety of mounting frames offers maximum fl exibility
- No electronics in high voltage cabinet protects controls from thermal overload
- Simple-to-operate controller for easy logic based programming, training, and maintenance
- Front panel of PCD allows direct access to system currents, recloser status, and settings
- Voltage sensing saves space by eliminating bulky potential transformers Up to four individually programmable reclose cycles (up to five shots to lockout)
- Communications equipment fi ts right in control cabinet
- 24 hour / 7 day dependable customer support.
Stainless enclosure with no electronics in the high voltage compartment for easy maintenance. Pole or substation mounted. Incorporates integrated voltage and current sensors, and virtually maintenance free magnetic actuators. The PCD control offers advanced capabilities such as adaptive protection, control monitoring, power quality, communications, single phase tripping, and loop control.

Inquire

Compare for selected.

OVR-3SP Three-Phase Recloser

ABB Inc

nominal voltage: 2.4-14.4 kV
Maximum Continuous Current: 630/800/1000/1200 A
Maximum Interrupting Current (symmetrical): 8000/10000/12500/16000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Hydrophobic Cycloaliphatic Epoxy (HCEP)
Remote lockout indicator: Available
Standard bushing leakage distance to ground: 38.00 In. (960 mm)
Alternative bushing leakage distance to ground: 9.50 In. (240 mm)
Available factory installed accessories: Supported communications technologies include: Wi-Fi, Cellular, Radio, Ethernet, SCADA, 900 MHz Spread and Spectrum
weight: 333 lbs. (150 kg)
Finish/color: Amber
manufacturer's comment
: Benefits are:
- Compact, lightweight design is easy to install, maneuver, and transport
- Cast aluminum or 304 stainless steel protects high and low voltage cabinets from the elements
- Variety of mounting frames offers maximum fl exibility
- No electronics in high voltage cabinet protects controls from thermal overload
- Simple-to-operate controller for easy logic based programming, training, and maintenance
- Front panel of PCD allows direct access to system currents, recloser status, and settings
- Voltage sensing saves space by eliminating bulky potential transformers Up to four individually programmable reclose cycles (up to fi ve shots to lockout) Communications equipment fi ts right in control cabinet
- 24 hour / 7 day dependable customer support.
Stainless enclosure with no electronics in the high voltage compartment for easy maintenance. Pole or substation mounted. Incorporates integrated voltage and current sensors, and virtually maintenance free magnetic actuators. The PCD control offers advanced capabilities such as adaptive protection, control monitoring, power quality, communications, single phase tripping, and loop control.

Inquire

Compare for selected.

Kyle® Type NOVA three-phase Recloser

Cooper Power Systems

nominal voltage: 2.4 kV - 14.4 kV
Maximum Continuous Current: 630 A
Maximum Interrupting Current (symmetrical):
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Solid Insulated
Remote lockout indicator:
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories:
weight: Weight (Mass) : 190 lbs. (86 kg) / 200 lbs. (91 kg)
Finish/color: Three solid-polymer interrupter modules with embedded current transformers and a standard aluminum mechanism housing; light gray is the standard color.
manufacturer's comment: Types NOVA15 recloser is controlled by a Cooper Power Systems threephase electronic recloser control. A choice of microprocessor-based controls are available to use in conjunction with this recloser.

Inquire

Compare for selected.

Kyle® Type NOVA-TS Triple-Single recloser

Cooper Power Systems

nominal voltage: 2.4 kV - 14.4 kV
Maximum Continuous Current: 400 A
Maximum Interrupting Current (symmetrical): 8000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?):
Remote lockout indicator:
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories:
weight:
Finish/color:
manufacturer's comment: Optional contact Inputs and Outputs along with a choice of communication options, RS232, RS485, Fiber-Optic, and Ethernet, can be ordered as accessories. Mounting provisions can be provided to add customer-supplied radio and modem modules.

Inquire

Compare for selected.

Kyle® Type NOVA-TS Triple-Single recloser

Cooper Power Systems

nominal voltage: 2.4 kV - 14.4 kV
Maximum Continuous Current: 800 A
Maximum Interrupting Current (symmetrical): 12500 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?):
Remote lockout indicator:
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories:
weight:
Finish/color:
manufacturer's comment: Optional contact Inputs and Outputs along with a choice of communication options, RS232, RS485, Fiber-Optic, and Ethernet, can be ordered as accessories. Mounting provisions can be provided to add customer-supplied radio and modem modules.

Inquire

Compare for selected.

Kyle® VSA-group three-phase Recloser - Type VSA12

Cooper Power Systems

nominal voltage: 2.4 kV - 14.4 kV
Maximum Continuous Current: 800 A
Maximum Interrupting Current (symmetrical): 12000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Air-Insulated
Remote lockout indicator:
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories
:
- Multi-Ratio Bushing Current-Sensing Transformers
- Bushings, Terminals :
  17-in.-creepage bushings..,
  Stud-type terminals, 1.25-12 UNF-2A..,
  4 hole flat-pad terminals..,
- Service-Related : 120 Vac motor operator, External spring-charging accessory, External contact-position-indicating accessory
- Remote Operation and Indication : Three -stage auxilliary switch
- Form 6 Rack Mount Substation Interface : DC Station Supply Interface
weight: 525 lbs.
Finish/color: Housings are fabricated of hotrolled steel which is phosphatized to resist corrosion, then finished with polyester powder paint. Finish color is light gray.
manufacturer's comment:
Best operating results are achieved when reclosers are protected with surge arresters. On line applications, arrester protection is recommended on both sides of a recloser. If protection is to be provided on one side only, it should be on the source side. In substations, arresters should be located on the load side.

Cooper Power Systems distributionclass surge arresters provide excellent protection.

Inquire

Compare for selected.

Kyle® VSA-group three-phase Recloser - Type VSA12B

Cooper Power Systems

nominal voltage: 2.4 kV - 14.4 kV
Maximum Continuous Current: 600 A
Maximum Interrupting Current (symmetrical): 12000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Air-Insulated
Remote lockout indicator:
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories
:
- Multi-Ratio Bushing Current-Sensing Transformers
- Bushings, Terminals :
  17-in.-creepage bushings..,
  Stud-type terminals, 1.125 -12 UNF-2A..,
  4 hole flat-pad terminals..,
- Service-Related : 120 Vac motor operator, External spring-charging accessory, External contact-position-indicating accessory
- Remote Operation and Indication : Three -stage auxilliary switch
- Form 6 Rack Mount Substation Interface : DC Station Supply Interface
weight: 525 lbs.
Finish/color: Housings are fabricated of hotrolled steel which is phosphatized to resist corrosion, then finished with polyester powder paint. Finish color is light gray.
manufacturer's comment:
Best operating results are achieved when reclosers are protected with surge arresters. On line applications, arrester protection is recommended on both sides of a recloser. If protection is to be provided on one side only, it should be on the source side. In substations, arresters should be located on the load side.

Cooper Power Systems distributionclass surge arresters provide excellent protection.

Inquire

Compare for selected.

Kyle® VSA-group three-phase Recloser - Type VSA16

Cooper Power Systems

nominal voltage: 2.4 kV - 14.4 kV
Maximum Continuous Current: 800 A
Maximum Interrupting Current (symmetrical): 16000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Air-Insulated
Remote lockout indicator:
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories
:
- Multi-Ratio Bushing Current-Sensing Transformers
- Bushings, Terminals :
  17-in.-creepage bushings..,
  Stud-type terminals, 1.125 -12 UNF-2A..,
  4 hole flat-pad terminals..,
- Service-Related : 120 Vac motor operator, External spring-charging accessory, External contact-position-indicating accessory
- Remote Operation and Indication : Three -stage auxilliary switch
- Form 6 Rack Mount Substation Interface : DC Station Supply Interface
weight: 525 lbs.
Finish/color: Housings are fabricated of hotrolled steel which is phosphatized to resist corrosion, then finished with polyester powder paint. Finish color is light gray.
manufacturer's comment:
Best operating results are achieved when reclosers are protected with surge arresters. On line applications, arrester protection is recommended on both sides of a recloser. If protection is to be provided on one side only, it should be on the source side. In substations, arresters should be located on the load side.

Cooper Power Systems distributionclass surge arresters provide excellent protection.

Inquire

Compare for selected.

Kyle® VSA-group three-phase Recloser - Type VSA20

Cooper Power Systems

nominal voltage: 2.4 kV - 14.4 kV
Maximum Continuous Current: 800 A
Maximum Interrupting Current (symmetrical): 20000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Air-Insulated
Remote lockout indicator:
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories
:
- Multi-Ratio Bushing Current-Sensing Transformers
- Bushings, Terminals :
  17-in.-creepage bushings..,
  Stud-type terminals, 1.125 -12 UNF-2A..,
  4 hole flat-pad terminals..,
- Service-Related : 120 Vac motor operator, External spring-charging accessory, External contact-position-indicating accessory
- Remote Operation and Indication : Three -stage auxilliary switch
- Form 6 Rack Mount Substation Interface : DC Station Supply Interface
weight: 525 lbs.
Finish/color: Housings are fabricated of hotrolled steel which is phosphatized to resist corrosion, then finished with polyester powder paint. Finish color is light gray.
manufacturer's comment:
Best operating results are achieved when reclosers are protected with surge arresters. On line applications, arrester protection is recommended on both sides of a recloser. If protection is to be provided on one side only, it should be on the source side. In substations, arresters should be located on the load side.

Cooper Power Systems distributionclass surge arresters provide excellent protection.

Inquire

Compare for selected.

Kyle® VSA-group three-phase Recloser - Type VSA20A

Cooper Power Systems

nominal voltage: 2.4 kV - 14.4 kV
Maximum Continuous Current: 1200 A
Maximum Interrupting Current (symmetrical): 20000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Air-Insulated
Remote lockout indicator:
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories
:
- Multi-Ratio Bushing Current-Sensing Transformers
- Service-Related : 120 Vac motor operator, External spring-charging accessory, External contact-position-indicating accessory
- Remote Operation and Indication : Three -stage auxilliary switch
- Form 6 Rack Mount Substation Interface : DC Station Supply Interface
weight: 740 lbs.
Finish/color: Housings are fabricated of hotrolled steel which is phosphatized to resist corrosion, then finished with polyester powder paint. Finish color is light gray.
manufacturer's comment:
Best operating results are achieved when reclosers are protected with surge arresters. On line applications, arrester protection is recommended on both sides of a recloser. If protection is to be provided on one side only, it should be on the source side. In substations, arresters should be located on the load side.

Cooper Power Systems distributionclass surge arresters provide excellent protection.

Inquire

Compare for selected.

Kyle® W-group three-phase Recloser

Cooper Power Systems

nominal voltage: 2.4 kV - 14.4 kV
Maximum Continuous Current: 560 A
Maximum Interrupting Current (symmetrical): 12000 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?):
Remote lockout indicator:
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories
:
- Low-Voltage Closing and Transfer Switch
- Bushings and Terminals
- Continuous Current Accessory
- Hardware : Oil-level sight gauge
weight: Weight-with oil : 790 lbs.
Finish/color: Heads are aluminum castings. Tanks are heavygauge steel, finished with polyester powder paint (Munsell 5BG 7.0/0.4; light gray is the standard color).
manufacturer's comment: Best operating results are achieved if reclosers are protected with surge arresters. On line applications, arrester protection is recommended on both sides of the recloser. (If protection is on one side only, it should be on the source side.) In substations, arresters should be on the load side. Cooper Power Systems distribution-class arresters provide excellent protection and are available with mounting brackets to fit Kyle reclosers

Inquire

Compare for selected.

VIPER-S® Solid Dielectric, Three Phase Recloser

G&W Electric Co

nominal voltage:
Maximum Continuous Current: 800 A
Maximum Interrupting Current (symmetrical): 12500 A
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Solid dielectric insulated
Remote lockout indicator:
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories:
weight: Weight less bracket : 325 lbs. (148 kg).
Finish/color: Painted with a Munsell 7.0GY3.29/1.5 green finish.
manufacturer's comment
:
Applications
- Sectionalizing schemes
- Distributed automatic transfer
- Distribution automation
- Circuit breaker alternative
- Relay protection
- Revenue grade metering
- Open bus ties

Request Quote

Compare or Request Quote for selected.

TriMod™ 300 Series Three Phase Vacuum Recloser

Joslyn Hi-Voltage

nominal voltage: 14.4 kV
Maximum Continuous Current: 630 or 800 A
Maximum Interrupting Current (symmetrical): 6000 A RMS
load-interrupting current (asymmetrical): 33000 A
Insulation material (i.e. oil, air epoxy?): Solid High Dielectric Foam
Remote lockout indicator: Available (Faultmaster 2500 Recloser Control, 351J Recloser Control)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Arrester mounting bracket, Substation mounting frame (9', 12', 15') and Extra creepage bushings
weight: 275 lbs. (125 kg)
Finish/color:
manufacturer's comment: When ordering it is adviced to:
1 Specify TriModä 300 Vacuum Recloser by selecting voltage class, continuous current, and interrupting current rating from the ratings table.
2 Specify control cable length. 3 Specify Control: Faultmaster 2500 or 351 J

Request Quote

Compare or Request Quote for selected.

TriMod™ 300 Series Three Phase Vacuum Recloser

Joslyn Hi-Voltage

nominal voltage: 14.4 kV
Maximum Continuous Current: 630 or 800 A
Maximum Interrupting Current (symmetrical): 10000 A RMS
load-interrupting current (asymmetrical): 33000 A
Insulation material (i.e. oil, air epoxy?): Solid High Dielectric Foam
Remote lockout indicator: Available (Faultmaster 2500 Recloser Control, 351J Recloser Control)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Arrester mounting bracket, Substation mounting frame (9', 12', 15') and Extra creepage bushings
weight: 275 lbs. (125 kg)
Finish/color:
manufacturer's comment: When ordering it is adviced to:
1 Specify TriModä 300 Vacuum Recloser by selecting voltage class, continuous current, and interrupting current rating from the ratings table.
2 Specify control cable length. 3 Specify Control: Faultmaster 2500 or 351 J

Request Quote

Compare or Request Quote for selected.

TriMod™ 300 Series Three Phase Vacuum Recloser

Joslyn Hi-Voltage

nominal voltage: 14.4 kV
Maximum Continuous Current: 630 or 800 A
Maximum Interrupting Current (symmetrical): 12500 A RMS
load-interrupting current (asymmetrical): 33000 A
Insulation material (i.e. oil, air epoxy?): Solid High Dielectric Foam
Remote lockout indicator: Available (Faultmaster 2500 Recloser Control, 351J Recloser Control)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Arrester mounting bracket, Substation mounting frame (9', 12', 15') and Extra creepage bushings
weight: 275 lbs. (125 kg)
Finish/color:
manufacturer's comment: When ordering it is adviced to:
1 Specify TriModä 300 Vacuum Recloser by selecting voltage class, continuous current, and interrupting current rating from the ratings table.
2 Specify control cable length. 3 Specify Control: Faultmaster 2500 or 351 J

Request Quote

Compare or Request Quote for selected.

TriMod™ 300 Series Three Phase Vacuum Recloser

Joslyn Hi-Voltage

nominal voltage: 14.4 kV
Maximum Continuous Current: 630 or 800 A
Maximum Interrupting Current (symmetrical): 16000 A RMS
load-interrupting current (asymmetrical): 33000 A
Insulation material (i.e. oil, air epoxy?): Solid High Dielectric Foam
Remote lockout indicator: Available (Faultmaster 2500 Recloser Control, 351J Recloser Control)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Arrester mounting bracket, Substation mounting frame (9', 12', 15') and Extra creepage bushings
weight: 275 lbs. (125 kg)
Finish/color:
manufacturer's comment: When ordering it is adviced to:
1 Specify TriModä 300 Vacuum Recloser by selecting voltage class, continuous current, and interrupting current rating from the ratings table.
2 Specify control cable length. 3 Specify Control: Faultmaster 2500 or 351 J

Request Quote

Compare or Request Quote for selected.

TriMod™ 300R Three Phase Recloser

Joslyn Hi-Voltage

nominal voltage: 14.4 kV
Maximum Continuous Current: 630 or 800 A
Maximum Interrupting Current (symmetrical): 6000 A RMS
load-interrupting current (asymmetrical): 33000 A
Insulation material (i.e. oil, air epoxy?): Solid High Dielectric Foam
Remote lockout indicator: Available (SEL-351R Recloser Control)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Arrester mounting bracket, Substation mounting frame, Extra creepage bushings and Wildlife protectors
weight: 330 lbs. (150 kg)
Finish/color:
manufacturer's comment: Long-Life Vacuum Interrupters provides twice (2x) the duty cycle required by ANSI C.37.60. When ordering and Specifying Information it is adviced to:
1. Specify TriModä 300R Vacuum Recloser by selecting voltage class, continuous current, and interrupting current rating from the ratings table.
2. Specify control cable length up to 100' (5' increments).
3. Specify 351R Control. Consult factory for part number.

Request Quote

Compare or Request Quote for selected.

TriMod™ 300R Three Phase Recloser

Joslyn Hi-Voltage

nominal voltage: 14.4 kV
Maximum Continuous Current: 630 or 800 A
Maximum Interrupting Current (symmetrical): 10000 A RMS
load-interrupting current (asymmetrical): 33000 A
Insulation material (i.e. oil, air epoxy?): Solid High Dielectric Foam
Remote lockout indicator: Available (SEL-351R Recloser Control)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Arrester mounting bracket, Substation mounting frame, Extra creepage bushings and Wildlife protectors
weight: 330 lbs. (150 kg)
Finish/color:
manufacturer's comment: Long-Life Vacuum Interrupters provides twice (2x) the duty cycle required by ANSI C.37.60. When ordering and Specifying Information it is adviced to:
1. Specify TriModä 300R Vacuum Recloser by selecting voltage class, continuous current, and interrupting current rating from the ratings table.
2. Specify control cable length up to 100' (5' increments).
3. Specify 351R Control. Consult factory for part number.

Request Quote

Compare or Request Quote for selected.

TriMod™ 300R Three Phase Recloser

Joslyn Hi-Voltage

nominal voltage: 14.4 kV
Maximum Continuous Current: 630 or 800 A
Maximum Interrupting Current (symmetrical): 12500 A RMS
load-interrupting current (asymmetrical): 33000 A
Insulation material (i.e. oil, air epoxy?): Solid High Dielectric Foam
Remote lockout indicator: Available (SEL-351R Recloser Control)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Arrester mounting bracket, Substation mounting frame, Extra creepage bushings and Wildlife protectors
weight: 330 lbs. (150 kg)
Finish/color:
manufacturer's comment: Long-Life Vacuum Interrupters provides twice (2x) the duty cycle required by ANSI C.37.60. When ordering and Specifying Information it is adviced to:
1. Specify TriModä 300R Vacuum Recloser by selecting voltage class, continuous current, and interrupting current rating from the ratings table.
2. Specify control cable length up to 100' (5' increments).
3. Specify 351R Control. Consult factory for part number.

Request Quote

Compare or Request Quote for selected.

TriMod™ 300R Three Phase Recloser

Joslyn Hi-Voltage

nominal voltage: 14.4 kV
Maximum Continuous Current: 630 or 800 A
Maximum Interrupting Current (symmetrical): 16000 A RMS
load-interrupting current (asymmetrical): 33000 A
Insulation material (i.e. oil, air epoxy?): Solid High Dielectric Foam
Remote lockout indicator: Available (SEL-351R Recloser Control)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Arrester mounting bracket, Substation mounting frame, Extra creepage bushings and Wildlife protectors
weight: 330 lbs. (150 kg)
Finish/color:
manufacturer's comment: Long-Life Vacuum Interrupters provides twice (2x) the duty cycle required by ANSI C.37.60. When ordering and Specifying Information it is adviced to:
1. Specify TriModä 300R Vacuum Recloser by selecting voltage class, continuous current, and interrupting current rating from the ratings table.
2. Specify control cable length up to 100' (5' increments).
3. Specify 351R Control. Consult factory for part number.

Request Quote

Compare or Request Quote for selected.

TriMod™ 600R Series Vacuum Recloser

Joslyn Hi-Voltage

nominal voltage: 14.4 kV
Maximum Continuous Current: 630 or 800 A
Maximum Interrupting Current (symmetrical): 6000 A RMS
load-interrupting current (asymmetrical): 42000 A
Insulation material (i.e. oil, air epoxy?): Solid High Dielectric Foam
Remote lockout indicator: Available (SEL-651R Advanced Recloser Control)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Arrester mounting bracket, Substation mounting frames and Extra creepage bushings
weight: 330 lbs. (150 kg)
Finish/color:
manufacturer's comment: When ordering it is adviced to:
1 Specify TriModä 600R Vacuum Recloser by selecting model number from the ratings table.
2 Specify length of interconnecting control cable up to 50 feet.
3 Specify Schweitzer 651R recloser control.
4 Select options and accessories

Request Quote

Compare or Request Quote for selected.

TriMod™ 600R Series Vacuum Recloser

Joslyn Hi-Voltage

nominal voltage: 14.4 kV
Maximum Continuous Current: 630 or 800 A
Maximum Interrupting Current (symmetrical): 10000 A RMS
load-interrupting current (asymmetrical): 42000 A
Insulation material (i.e. oil, air epoxy?): Solid High Dielectric Foam
Remote lockout indicator: Available (SEL-651R Advanced Recloser Control)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Arrester mounting bracket, Substation mounting frames and Extra creepage bushings
weight: 330 lbs. (150 kg)
Finish/color:
manufacturer's comment: When ordering it is adviced to:
1 Specify TriModä 600R Vacuum Recloser by selecting model number from the ratings table.
2 Specify length of interconnecting control cable up to 50 feet.
3 Specify Schweitzer 651R recloser control.
4 Select options and accessories

Request Quote

Compare or Request Quote for selected.

TriMod™ 600R Series Vacuum Recloser

Joslyn Hi-Voltage

nominal voltage: 14.4 kV
Maximum Continuous Current: 630 or 800 A
Maximum Interrupting Current (symmetrical): 12500 A RMS
load-interrupting current (asymmetrical): 42000 A
Insulation material (i.e. oil, air epoxy?): Solid High Dielectric Foam
Remote lockout indicator: Available (SEL-651R Advanced Recloser Control)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Arrester mounting bracket, Substation mounting frames and Extra creepage bushings
weight: 330 lbs. (150 kg)
Finish/color:
manufacturer's comment: When ordering it is adviced to:
1 Specify TriModä 600R Vacuum Recloser by selecting model number from the ratings table.
2 Specify length of interconnecting control cable up to 50 feet.
3 Specify Schweitzer 651R recloser control.
4 Select options and accessories

Request Quote

Compare or Request Quote for selected.

Medium Voltage Distribution N-Series Three phase recloser

Nu-Lec LLC

nominal voltage: 15.5kV
Maximum Continuous Current: 800 A
Maximum Interrupting Current (symmetrical): 12500 A RMS
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Sulphur hexaflouride (SF6) gas
Remote lockout indicator: Available (WSOS)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Mounting arrangement (Pole mount, Substation frame), Control cable, Concrete pole clamps and Bushing boots.
weight: 249 kg (with pole mount bracket)
Finish/color:
manufacturer's comment: Recloser can be mounted closer to pole if lightning arresters are pole mounted. Optional substation mounting frame available on request.

Request Quote

Compare or Request Quote for selected.

N-Series Three Phase Automatic Circuit Recloser

Nu-Lec LLC

nominal voltage: 15.5kV
Maximum Continuous Current: 800 A
Maximum Interrupting Current (symmetrical): 12500 A RMS
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Sulphur hexaflouride (SF6) gas
Remote lockout indicator: Available (WSOS)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Mounting arrangement (Pole mount, Substation frame), Control cable, Concrete pole clamps and Bushing boots.
weight: 249 kg (with pole mount bracket)
Finish/color:
manufacturer's comment:
The Nu-Lec Industries automatic circuit reclosers provide many outstanding advantages to the user. New and innovative features have been made possible by the intimate way the pole mounted circuit breaker and control cubicle work together.
WSOS is the Nu-Lec Industries Switchgear Operating System software based on Microsoft Windows®. It provides easy access to all switchgear functions from opening/closing, through configuring protection and communication parameters to accessing measurement and analytical data. By using a desktop or portable PC engineers can manage a large number of reclosers either remotely via a communications link or locally via a serial port or Ethernet connection.

Request Quote

Compare or Request Quote for selected.

U-Series solid dielectric automatic circuit recloser

Nu-Lec LLC

nominal voltage: 15.5kV
Maximum Continuous Current: 630 A
Maximum Interrupting Current (symmetrical): 12500 A RMS
load-interrupting current (asymmetrical):
Insulation material (i.e. oil, air epoxy?): Cyclo-aliphatic epoxy bushings
Remote lockout indicator: Available (WSOS)
Standard bushing leakage distance to ground:
Alternative bushing leakage distance to ground:
Available factory installed accessories: Mounting arrangement (Pole mount, Substation frame), Control cable and Concrete pole clamps
weight: 146 kg (with pole mount bracket)
Finish/color:
manufacturer's comment: WSOS is the Nu-Lec Industries Switchgear Operating System software based on Microsoft Windows®. It provides easy access to all switchgear functions from opening/closing, through configuring protection and communication parameters to accessing measurement and analytical data. By using a desktop or portable PC engineers can manage a large number of reclosers either remotely via a communications link or locally via a serial port or Ethernet connection.